Orion-system VCC-X Controller Manuel d'utilisateur Page 5

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 120
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 4
OVERVIEW
5
VCC-X Controller Technical Guide
System Features
Features
The VCB-X Controller (OE335-26B-VCBX-A) is designed with 5
analog inputs, 3 analog outputs, 1 triac output, 4 binary inputs, and 6
relay outputs. It also has an on-board BACnet
®
port for connection to
an MS/TP network. The Controller contains a 2 x 8 LCD character
display and 4 buttons that allow for status and alarm display and
force modes as well as BACnet con guration.
The VCB-X EM1 Expansion Module (OE336-23-EM1-A) provides
an additional 6 analog inputs, 4 analog outputs, 3 binary inputs,
and 5 con gurable relay outputs. The VCB-X EM2 Expansion
Module (OE336-23-EM2-A) provides an additional 1 analog
input, 2 analog outputs, and 3 binary inputs. The VCB-X 12
Relay Expansion Module (OE358-23E-12R-A) provides up to 12
additional con gurable relay outputs.
There are also 2 E-BUS Expansion Ports which allow for
the connection of the three expansion modules listed above,
communicating sensors, an EBTRON
®
or GreenTrol
TM
Air ow
Monitoring system, and future E-BUS Modules via modular cable
assemblies. There are presently 5 communicating sensors available.
Two of these sensors have LCD displays: E-BUS Digital Space
Temperature Only Sensor or E-BUS Digital Space Temperature
and Humidity Sensor. There is a communicating E-BUS Space
Temperature and Humidity Sensor with no LCD display as well as
an E-BUS Space CO
2
Sensor, and E-BUS Duct CO
2
Sensor with
no LCD display.
The VCB-X Controller provides for Constant Volume, VAV, Single
Zone VAV, MUA, and Air to Air Heat Pump applications.
Most common HVAC unit control applications can be con gured
using only the VCB-X Controller. If the application requires more
inputs and/or outputs, the optional expansion modules are available
to provide for additional analog, binary, or digital inputs and outputs
as required.
Other features of the VCB-X include:
Up to 5 Total Stages of Heating and Cooling
Direct Digital Control of Copeland Digital
Scroll™ Compressor
Modulating Cooling Output for Chilled Water
Valve Control
Modulating Heating Output ( Hot Water Valve,
Steam Valve, SCR Electric Heat Control)
Full Integration with the AAON
®
MODGAS-X
Modulating Natural Gas Controller
Full Integration with the AAON
®
MHGRV-X
Modulating Hot Gas Reheat Controller
Con gurable for Heat Pump Applications
Heat Pump Defrost Operation
Advanced Dehumidi cation Capabilities
Auxiliary and Emergency Heat Options for Heat
Pumps
Air Flow Monitoring of Outdoor Air, Supply Air,
Return Air, and Exhaust Air Streams
Air Flow Control of Outdoor Air Damper
Single Zone VAV Control w/Optional CAV Heating
Primary/Secondary Heating Control
Remote Forced Cooling, Heating, and
Dehumidi cation Control
Remote SAT Reset Signal
Return Air Bypass Control
Adaptive Supply Air Reset
Selectable Mode Enable Sensor
Fan Proving Interlock
Dirty Filter Alarm
Emergency Shutdown Input (Smoke Detector/
Firestat or other Shutdown Conditions)
Drybulb/Wetbulb/Dewpoint Control of Economizer
Operation
Building Pressure Control (Direct or Reverse
Acting)
Remote Forced Occupied Capability
Con gurable for AAON
®
PAC and DPAC Applications
IAQ Economizer Reset
Title 24 Economizer Certi ed
7-Day, 2-Event-per-Day Scheduling
14 Holiday Event Scheduling
Daylight Savings Time Adjustment
Trend Logging Capability
Static Pressure Control for Filter Loading
Applications
Heat Wheel - On/Off Control
Head Pressure Control
Water Source Heat Pump Monitoring
On-board BACnet
®
port for connection to an
MS/TP network (See Appendices B & C)
Vue de la page 4
1 2 3 4 5 6 7 8 9 10 ... 119 120

Commentaires sur ces manuels

Pas de commentaire