Orion-system VCC-X Controller Manuel d'utilisateur Page 58
- Page / 96
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Zone
Zone
VCC-X STATUS
VCC-X Operator Interface SD
58
VCC-X Status Screens
Status Screen #14 - PREHEAT-X Controller
Current Leaving Air and Entering Air
Temperature
VCC-X v1.02 ID #
Preheat-X Temps
Leaving Air: 0.0ºF
Entring Air: 0.0ºF
Line 3 Current PREHEAT-X Leaving Air Temperature
If the Preheat-X Controller (and the associated Leaving
Air Temperature Sensors) is installed and confi gured,
this line will display the current Preheat-X Leaving Air
Temperature.
Line 4 Current PREHEAT-X Entering Air Temperature
If the Preheat-X Controller (and the associated Entering
Air Temperature Sensor) is installed and confi gured, this
line will display the current Preheat-X Entering Air
Temperature.
Status Screen #15 - PREHEAT-X Controller
Modulating Position and Active Stages
VCC-X v1.02 ID #
Preheat-X Status
Mod Pos: XXX%
Active Stages: X
Line 3 Current PREHEAT-X Modulating Position
If you have a PREHEAT-X Controller connected to
the VCC-X Controller and are using Modulating Heat,
this is the current modulating heat signal
.
Line 4 Current PREHEAT-X Active Stages
If you have a PREHEAT-X Controller connected to the
VCC-X Controller, and are using staged heat, this is the
number of stages currently active.
Status Screen #16 - OA Drybulb and Humidity
VCC-X v1.02 ID #
Outdoor Conditions
Drybulb: 0.0ºF
Humidity: XXX%
Line 3 Current Outdoor Air Drybulb
If an E-BUS Outdoor Air Temperature/Humidity Sensor
has been installed and confi gured on the VCC-X, the
current Outdoor Air Temperature will display on this
line. If the sensor fails, this line will display a
temperature that is half way between the Cooling and
Heating Lockout Setpoints.
Line 4 Current Outdoor Air Relative Humidity
If an E-BUS Outdoor Air Temperature/Humidity Sensor
has been installed and confi gured on the VCC-X, the
Outdoor Air Relative Humidity Percentage will appear
on this line. If not, this line will display 0%.
Status Screen #17 - OA Wetbulb and Dewpoint
VCC-X v1.02 ID #
Outdoor Conditions
Wetbulb: 0.0ºF
Dewpoint: 0.0ºF
Line 3 Current Wetbulb Temperature
If an E-BUS Outdoor Air Temperature/Humidity Sensor
has been installed and confi gured on the unit, this line
will display the calculated Outdoor Air Wetbulb
Temperature. If not, it will display 0°F.
Line 4 Current Calculated Outdoor Air Dewpoint
Temperature
If an E-BUS Outdoor Air Temperature/Humidity Sensor
has been installed and confi gured on the unit, the
calculated Outdoor Air Dewpoint Temperature will
appear on this line. If not, this screen displays 0°F.
- VCC-X Controller 1
- Operator Interface SD 1
- Technical Guide 1
- SD CARD UPDATING INSTRUCTIONS 2
- IMPORTANT NOTICE 2
- SYSTEM CONNECTION 4
- Modular Service Tool SD 4
- Modular Service Tool 5
- Modular System Manager SD 6
- Network Connection 7
- Power/Comm Board Wiring 8
- Stand Alone Connection 9
- MODULAR SERVICE TOOL SD 10
- Modular Service Tool Keys 10
- VCC-X Operator Interface SD 11
- Alarm and Override Search 13
- Schedules and Holidays 14
- MODULAR SYSTEM MANAGER SD 16
- MODULAR SYSTEM MANAGER SD 17
- Setting the Operating Mode 18
- Changing Passcodes 19
- VCC-X CONFIGURATION 24
- VCC-X CONFIGURATION 25
- VCC-X Confi guration Screens 25
- VCC-X Confi guration Screens 26
- VCC-X Setpoint Screens 39
- VCC-X SETPOINTS 40
- VCC-X SETPOINTS 41
- VCC-X STATUS 54
- VCC-X Status Screens 54
- RSMV CONFIGURATION 64
- RSMV Confi guration Screens 64
- RSMV STATUS 67
- RSMV Status Screens 67
- VAV/ZONE CONFIGURATION 69
- VAV/ZONE CONFIGURATION 70
- VAV/Zone Setpoint Screens 72
- VAV/ZONE STATUS 76
- VAV/Zone Status Screens 76
- VAV/ZONE DAMPER FORCE 78
- VAV/Zone Damper Force Modes 78
- MINILINK PD CONFIGURATION 80
- VCC-X Outputs Force 81
- TROUBLESHOOTING 82
- > to get to the Balance 83
- Save Setpoints - Network Mode 83
- SD Memory Card Update 85
- WattMaster Controllers 86
- HVAC Mode Deadband.........41 89
- VAV/Zone.........75 89
- Controlling Sensor Low Alarm 91
- VAV/Zone Confi guration 93
- VAV/Zone Status 93
- Zone Damper Position 94
Produits connexes et manuels pour Matériel Orion-system VCC-X Controller
(8 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.060 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels