Orion-system PT-Link II BACnet3 Manuel d'utilisateur télécharger pdf (Page 12)

Zone

3. PT-LINK CONFIGURATION

PT-Link II BACnet3 Interface

3.3 IP Address Conﬁ guration

Figure 10: BACnet MS/TP Settings for Node_Offset

3.3.2 BACnet MS/TP - Setting Node_

Offset to Assign Speciﬁ c Device

Instances

After setting your PC to be on the same subnet as the PT-Link,

open a web browser on your PC and enter the IP address of

the PT-Link; the default address is 192.168.1.24. (Figure 10).

1. If the IP address of the PT-Link has been changed by previous

conﬁ guration, you will need to get the assigned IP address from the

network administrator or use the FieldServer ToolBox to ﬁ nd the

IP Address.

2. The conﬁ guration page will be displayed as your landing page.

(Figure 10)

3. The node offset can be changed on the conﬁ guration page.

4. The Node_Offset ﬁ eld will be presented displaying the current

value (default = 50,000).

5. Change the value of Node_Offset to establish the desired Device

Instance value, and click <Submit>.

Device Instance = Node_Offset +

A bank DIP switch setting

(A1-A7)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 71 72

Pas de commentaire

Orion-system PT-Link II BACnet3 Manuel d'utilisateur Page 12