Orion-system GPC-XP Controller Manuel d'utilisateur télécharger pdf (Page 52)

Appendix B

GPC-XP Controller Technical Guide

USB Serial Converter and Serial Port Driver

Installation

The internal USB communication port of the GPC-XP Controller

uses a specialized driver that must be installed on your Windows PC

before communication to the device can be established.

NOTE: You may already have this driver installed on your PC if

you are using a USB-Link 2 or CommLink 5.

1. Before you begin, you must determine if your computer

is running 32-bit or 64-bit Windows. Open the System

information by clicking the

<Start> button, clicking

<Control Panel>, and clicking <System>. Under

System, you can view the system type. Based on what

type of system you have, you will choose 32_Bit.exe or

64_Bit.exe from the list of ﬁ les shown in Step 10.

2. Insert the USB Drivers CD-ROM into your CD-ROM

drive or download the USB Drivers ﬁ le from www.

orioncontrols.com/a/software/. If using the CD-ROM, go

to Step 7.

3. If downloading the ﬁ le, you will need to scroll down the

page to ﬁ nd “USB Driver Software For All Products” to

download the driver ﬁ les. .

4. Go to the “USB-DRIVERS-ALL.exe” ﬁ le on your desk-

top. Double-click on this ﬁ le and choose “Run” from the

options list. The following window will appear:

5. Select

<Unzip> and the ﬁ le will be unzipped to the

folder C:\Temp\WM-USB-Drivers folder by default.

6. Next, go to the C:\Temp\WM-USB-Drivers folder and

now go to Step 9.

7. Click your

<Start> button and then click, <Computer>.

8. Double-click your CD-ROM drive. Open the Media

Files Folder.

9. Double-click the folder “USBLink NewSS0073”.

10. The following list of ﬁ les will display. Choose 32_Bit.

exe or 64_Bit.exe based on what type of system you

determined you have in Step 1.

11. In the window that pops up, shown below, click

<Next>

and the installation program will walk you through the

rest of the steps.

12. When successful installation has occurred, connect the

USB cable between the PC and the GPC-XP Controller.

The PC will automatically recognize the device and a

COM port will be assigned.

NOTE: The COM port used must not be greater than

COM9. If the PC assigned a COM port greater than

COM9, please proceed to page 53 to change the USB

COM port.

USB Driver Installation

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Commentaires sur ces manuels

Pas de commentaire

Orion-system GPC-XP Controller Manuel d'utilisateur Page 52

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Orion-system GPC-XP Controller